0t4sp
£0.00
0
Description
The NHD-500-DNT-TX from WyreStorm is part of the powerful NetworkHD 500 series. Capable of encoding up to 4K60 including Dolby Vision, HDR10 and HLG content. The NHD-500-DNT-TX has a number of advanced features such as the flexibility of Ethernet or fibre as a transport method. Ultra low latency encoding and incredibly fast matrix switching speeds enhance the experience. Unique to this encoder is an integrated 2 channel Dante® and AES67 audio output.
The NHD-500-DNT-TX from WyreStorm is part of the powerful NetworkHD 500 series. Capable of encoding up to 4K60 including Dolby Vision, HDR10 and HLG content.
This encoder has a number of advanced features such as the flexibility of Ethernet or fibre as a transport method.
Ultra low latency encoding and incredibly fast matrix switching speeds enhance the experience. Unique to this encoder is an integrated 2 channel Dante® and AES67 audio output.
The integrated 2 channel Dante® and AES67 output allows audio to be sent over the network to compatible Dante® and AES67 enabled DSPs, amplifiers, mixers and more. Audio can be transmitted via Dante® from either the encoder's HDMI input or a separate analog input. Dante® audio and NetworkHD A/V can be integrated into the same network or separated via a dedicated Dante only port. If 3rd party Dante equipment exists on a dedicated network, simply connect the Dante only port to keep things separate and avoid complicated network configurations.
Capable of encoding full HDMI 2.0 content, including 4K60 4:4:4 8bit and high dynamic range video including Dolby Vision, HDR10 and HLG up to 12bit 4:2:2 at 60Hz over a 1GbE network. Equipped with both Ethernet and fibre outputs, the NHD-500-DNT-TX offers flexibility for any installation.
Ethernet can support transmissions up to 100m (328ft) and fibre is capable of a stunning 550m / 1800ft using OM3 MMF.
Specifications:
| Inputs | 1 x HDMI 2.0 1 x 3.5mm TRS Analog |
| Outputs | 1 x 5 pin balanced audio 1 x Toslink Digital |
| Video Resolution (Max) | 4096x2160p @ 60Hz 8bit 4:4:4 or RGB 3840x2160p @ 60Hz 12bit 4:2:2 Dolby Vision 1920x1080p @ 60Hz 12bit |
| Supported Standards | DCI, RGB, BT.2020, BT.709, HDR10, HDR10+, HLG, Dolby Vision |
| Maximum Pixel Clock | 600Mhz |
| Output Video Encoding | JPEG 2000 |
| Encoding Data Rate | Max 850Mbps |
| End to End Latency | 1 video frame latency (pass through mode) 16ms @ 4K60 2 video frames latency (scaler/VW mode) |
| HDMI | HDMI 2.0 HDCP 2.2 CEC EDID |
| LAN | 2 x 1GbE 8 Pin RJ45 (Danta & main AV) 1 x 1Gb SFP (1000BaseT-SX: 550m using OM3 MMF) |
| IR | 1 x IR TX 3.5mm TS Mono Jack, API programmable 1 x IR RX 3.5mm TRS Stereo Jack, API programmable |
| RS-232 | 1 x 3 Pin Phoenix Connector, 2 Way and API programmable |
| Communication Protocols | Telnet, TLS, SSH, HTTP, HTTPS |
| USB | 1 x USB 2.0 Type Host |
| Power Supply | 12V DC 1A 802.3af PoE compliant |
| Maximum BTU | 51.18 BTU/hr |
| Included | 1 x IR emitter 1 x IR receiver 2 x Wall mounting brackets 2 x rack mounting brackets 1 x 3 pin terminal block 1x 5 pin terminal block |
Features:
- Supports multi channel audio passthrough including DTS:X and Dolby Atmos
- Hugely scalable I/O, utilising multicast technology
- CEC One Touch play and standby, bi-directional IR or RS-232 control of connected devices
- Custom "No Source" idle image upload for branded down time
- Analogue audio de-embed output with volume control
- Batch firmware update and batch settings functions offers a massive reduction on installation times
- Custom EDID management with import and export
User guides
Download User Guides:
NHD Data Sheet
NetworkHD Brochure
NetworkHD Brochure
NHD Quick Start Guide
NHD500 Series Wiring Diagram
WyreStorm NHD 500 Application and Configuration Guide
Tech Brief: Network Security With NetworkHD
NHD API
WyreStorm AVoIP Switch Compatibility
Reviews
Favourites
Favourites is empty.
Compare
Shopping Cart