Zoom








The Power Sensing Trigger from Projecta / Da-Lite will turn every installation into an easy control system. Usually a projector needs to have a 12 volt trigger output to send the projection screen a signal to unroll when the system is turned on. This Projecta Da-Lite Power Sensing trigger will now give every projection system that functionality. This trigger does requires PRO-CTRLBOX , sold separately.
The Power Sensing Trigger from Projecta Da-Lite will turn every installation into an easy control system. Usually a projector needs to have a 12 volt trigger output to send the projection screen a signal to unroll when the system is turned on.
This Projecta Da-Lite Power Sensing trigger will now give every projection system that functionality.
The Trigger will be connected in between the power source and the projector. When the projector is turned on, the trigger senses power going to the projector and signal the projection screen to unroll. When the power is switched of the trigger will signal the projection screen to retract again.
This trigger is compatible with Projecta's / Da-Lite Tensioned Descender Electrol, Descender Pro, Tensioned Elpro Concept, Elpro Concept, Compact Electrol, Tensioned Descender Large Electrol, Descender Large Electrol and Tensioned Pro
Please Note: This trigger does requires PRO-CTRLBOX , sold separately.
Specifications:
Compatible With | Tensioned Descender Electrol Descender Pro Tensioned Elpro Concept Elpro Concept Compact Electrol Tensioned Descender Large Electrol Descender Large Electrol Tensioned Pro |
Power Supply | AC 200 to 240V, 50Hz |
Power Consumption | 180mA |
Load Capacity | ≤ 2000W |
Transmission Power | < 10mW |
RF Frequency | 433.92MHz |
Operating Temperature | 0°C / 32°F to 45°C / 113°F |
Features:
Please Note: This trigger does requires PRO-CTRLBOX , sold separately.
Favourites is empty.