PRIZE DRAW
Zoom
Description
This In Wall Presentation Kit with Control from WyreStorm provides an all in one solution for BYOD applications. Perfectly suited for education or corporate markets, this kit includes a 3 input HDBaseT in wall transmitter, HDBaseT receiver and 2.8" touchscreen controller. Use this kit to create a simple solution for conference rooms, huddle spaces, training rooms, lecture halls or anywhere users will bring their own devices to present.
This In Wall Presentation Kit with Control from WyreStorm provides an all in one solution for BYOD applications. Perfectly suited for education or corporate markets, this kit includes a 3 input HDBaseT in wall transmitter, HDBaseT receiver and 2.8" touchscreen controller.
Use this kit to create a simple solution for conference rooms, huddle spaces, training rooms, lecture halls or anywhere users will bring their own devices to present.
The in wall transmitter is a perfect solution for remote inputs. Install it near a podium or in the front of a room to allow BYOD connectivity for presentations. It can also be installed into a table or desk just as easily to provide a sleek, low profile option for huddle spaces or conference rooms.
The 2.8" touchscreen provides a simple yet effective user interface for switching inputs on the transmitter and the ability to send CEC commands to turn on or off a remote display. The interface has been pre-built by WyreStorm and doesn't require any programming.
The transmitter and receiver support USB extension capabilities. This allows laptops to utilise connected peripheral devices such as a remote webcam and speakerphone for online meetings or a touchscreen or smart display for interactive learning experiences.
Specifications:
| TS-280 Touch Screen | |
| Switcher Control | 1x RS-422: 8 pin RJ-45 Female |
| Max Communication Distance | 100m interface to touchscreen |
| Power Supply | 12VDC from touchscreen interface module |
| Max Power Consumption | 0.84W |
| Operating Temperature | 0°C / 32°F to 45°C / 113°F 10% to 90%, non condensing |
| Maximum BTU | Transmitter: 24 BTU/hr Receiver: 58 BTU/hr |
| Dimensions | Rack Unit/ Wall Box: 2 gang Height: 114mm / 4.49" Width: 117mm / 4.61" Depth: 32.1mm / 1.27" Weight: 0.30kg / 0.66lbs |
| Certifications | CE, FCC, RoHS |
| SW-130-TX-EU Transmitter | |
| HDMI | v2.0b TMDS 340MHz maximum |
| Inputs | 2 x HDMI In: 19 pin type A 1 x USB-C In: USB 3.1c audio/video (4.5Gbps) |
| Outputs | 1 x HDBT out: 8 pin RJ45 |
| Video Resolutions (Max) | 1920x1200p @60Hz 2560x1440p @60Hz 3840x2160p @30Hz 8bit 4:4:4 3840x2160p @30Hz 10bit 4:2:0 HDR 3840x2160p @30Hz 12bit 4:2:2 HDR |
| Supported Standards | DCI RGB HDR HDR10 Dolby Vision up to 30Hz HLG BT.2020 and BT.2100 |
| Audio Formats | 2 channel PCM Multichannel up to DTS-X and Dolby Atmos |
| Maximum Sampling Rate | 192kHz |
| Communication and Control: HDMI | 1x Type B host Maximum data throughput: 190Mbps |
| EDID | Passthrough, from RX |
| RS-232 | 1x RS-232: 4 pin Phoenix Shared with 12v DC input Compatible with WyreStorm TS-280 touchscreen via 4 pin phoenix port, only when using PoH |
| Power Supply | PoH 12V DC 1A. Sold separately |
| Power Over HDBaseT (PoH) | Supported, 1 way from RX |
| Max Power Consumption | 7.8W |
| Operating Temperature | 0°C / 32°F to 45°C / 113°F 10% to 90%, non condensing |
| Maximum BTU | 2.29 BTU/hr |
| Dimensions | In wall, 2 gang Height: 86mm / 3.38" Width: 146mm / 5.74" Depth: 38mm / 1.55" Weight: 0.27kg / 0.60lb |
| Certifications | CE FCC RoHS RCM EAC |
| Please Note | WyreStorm recommends the use of shielded category cable to minimise signal noise and interference |
| RX-500 Receiver | |
| Audio and Video | |
| Inputs | 1 x HDBT in 8 pin RJ-45 female 4 x USB Type A for device |
| Outputs | 1 x HDMI out 19 pin type A 2 x Audio out or de-embed 3.5mm / 1/8" TRS stereo |
| Output Video Encoding | HDBaseT Class B |
| Encoding Data Rate | 10.2Gbps |
| End to End Latency | 10μs (micro seconds) |
| Audio Formats | HDMI out 2 channel Analogue or PCM Multichannel LPCM up to DTS-X and Dolby Atmos audio out or de-embed 2 channel analog/PCM |
| Max Video Resolution | 1920x1080p @60Hz 12bit 3840x2160p @30Hz 8bit 4:4:4 3840x2160p @60Hz 8bit 4:2:0 |
| Supported Standards | DCI, RGB, HDR, HDR10, Dolby Vision up to 30Hz, HLG, BT.2020, BT.2100 |
| Communication and Control | |
| HDMI | HDMI, HDCP 2.2, EDID, CEC passthrough, DVI/D supported with adaptor, not included |
| HDBaseT | HDMI, USB, HDCP 2.2, EDID, 1 way PoH (RX powers TX), bidirectional RS-232, CEC |
| RS-232 | 1 x RS-232 3 pin Phoenix |
| Power | Power Supply: 12V DC 2A Average Power Consumption: 8W |
| Operating Temperature | 0°C / 32°F to 45°C / 113°F Relative Humidity: 10% to 90% non condensing |
| Dimensions | Height: 25mm / 0.98" Width: 210mm / 8.26" Depth: 90.2mm / 3.55" |
| Weight | 0.46kg / 1.01lb |
| Certifications | CE, FCC, RCM, EAC, RoHS |
| Included | 1 x 12V DC 2A PSU with US, UK, EU, AU pins 2 x Mounting brackets with screws 1 x 3 pin terminal block |
| Please Note | WyreStorm recommends the use of shielded category cable to minimise signal noise and interference |
Features:
TS-280 Touch Screen
- 2.8" color touchscreen perfect for WyreStorm switcher control
- Backlit with automatic power off and wake on touch
- Pre-configured UI's designed for simple end user experience
- Easy update with download UI from wyrestorm.com and load via MicroSD card
- RJ45 connection and RS-422 communication to included RS-232 converter
- 300m transmission range to host device
SW-130-TX-EU Transmitter
- HDBaseT switcher or transmitter for video conference meeting rooms
- 3 switchable inputs: 2 HDMI and USB-C
- Supports content up to 4K/60 4:2:0 or 4K/30 RGB 8 bit
- HDCP 2.2 encryption technology
- USB host connections of remote devices such as webcams, smart touchscreens and microphones
- USB-C port supports alt-mode functionality for AV and USB data
- USB-C charging for connected devices up to 5V 1A
- Additional 2 channel analogue audio input for sending separate stereo audio to RX
- Automatic or manual CEC triggering for compatible connected screens or projectors
RX-500 Receiver
- Supports content up to 4K/60 4:2:0 or 4K/30 RGB 8 bit up to 35m
- PoH enabled to remote power SW-130-TX transmitter
- USB 2.0 passthrough offering 190Mbps transfer and HID extension
- Features 4 USB device ports
- Supports analog audio passthrough from transmitter to receiver
- Supports analog audio de-embed from HDMI output
User guides
Download User Guides:
Data Sheet RX-500
Data Sheet SW-130-TX-UK
Data Sheet TS-280-EU
WyreStorm Product Guide
Quick Start Guide
Quick Start Guide
TS-280-EU Quick Start Guide
SW-130-TX-UK API
Favourites
Favourites is empty.
Compare
Shopping Cart